The Jiangong brand-polymer cement waterproof coating produced by Xinjian Gong Waterproof Material Technology Co., Ltd. in Ningde City, Fujian Province is an environmentally friendly, moisture-setting, hydraulically-hardening flexible waterproof coating developed using a unique organic-inorganic composite modification process. Construction on wet base surfaces is the first batch of new generation environmentally friendly building waterproofing materials promoted and used by the Ministry of Construction during the Ninth Five-Year Plan period. Its technical indicators fully meet or exceed the requirements of the national standard B/-. The product won the honorary title of Fujian Provincial Building Materials Reliable Product in 2016, and was listed as a Fujian Provincial Construction Science and Technology Achievements Promotion Project by the Fujian Provincial Department of Housing and Urban-Rural Development. [Product Features]
. It is made of an organic liquid material composed of copolymer emulsion and various additives and an inorganic powder composed of high-speed iron and high-alumina cement, quartz sand and various additives. It has different shapes according to different uses. Three models of products.
. It has the advantages of both the elasticity of organic materials and the durability and water resistance of inorganic materials
3. It is an environmentally friendly, moisture-curing, hydraulically-hardening flexible waterproof coating that can be constructed on wet base surfaces. , especially suitable for toilets, pools and indoor waterproofing projects
. High bonding strength, good elasticity and sealing effect, suitable for back surface, wall waterproofing and repair projects
. With ceramic tiles and stone slabs And various waterproof materials have good adhesion, can be directly bonded and used, and have a wide range of applications
. The coating is highly elastic and high-strength. Color coatings can be freely prepared according to project needs, and can also be matched with decorative coatings. Usage
. Liquid construction at normal temperature, high solid content, easy to form a film without joints, easy and safe construction, and short construction period.
[Construction method]
. Base layer treatment: The base layer must be flat, firm, clean, and free of open water. Uneven and cracked areas must be leveled and repaired first. Leakage areas must be plugged first. Yin and Yang angles must be leveled and repaired first. It should be made into an arc shape.
.Ingredients: This product is a two-component product. When using it, measure and take the materials according to the prescribed ratio. First pour the liquid components into the mixing barrel and stir with a slow-speed electric drill (approximately rpm). At the same time, slowly Slowly add the matching powder ingredients and stir for about 10 minutes until a uniform mixture is obtained. It is best to let it sit for 10 minutes before use. The prepared mixture should be used up as soon as possible within an hour.
3. Coating: If the base layer is too dry before construction, first slightly moisten the base surface with water, or use diluent to make a base layer. You can apply it with a brush or roller. The width of each application is cm-cm facade. Trowels and scrapers can be used for construction. Carcass reinforcement materials can be laid in places where cracks are more likely to occur.
.Dosage: Under ideal base layer conditions, the theoretical dosage of surviving ㎜ thickness is .㎏/㎡. Waterproof coating should be applied layer by layer. Please refer to relevant standards for fortification standards.
.Note: It is strictly prohibited to construct below ℃ or in the rain. Do not construct in a particularly humid and non-ventilated environment or under the scorching sun, otherwise it will affect the film formation. The decorative layer of the outer protective layer should be constructed only after the waterproof coating film is completely dry. For specific requirements, please refer to the relevant chapters of the "Quality Acceptance Specifications for Roofing Projects" and "Technical Specifications for Waterproofing of Underground Projects".
【Others】
.Liquid materials: Packed in plastic barrels, kg powder: Packed in laminated bags.
.This product is non-toxic, flame-retardant and non-corrosive. It is a general chemical product and can be transported as non-dangerous goods.
3. This product should be stored in a ventilated and dry room at a temperature of ℃ - ℃. Pay attention to the sealed packaging. The effective storage period is six months from the date of production. If the powder is agglomerated, use is prohibited.
JS waterproof coating